Loft Hatch

The Loft Hatch meets all building regulations for insulated and fire rated loft hatches and complies with Building Regulation Document L1 & L2 2002 and the robust document. Designed for domestic loft space access and to fit between 600mm centre trusses, the drop down door is a superb aesthetic alternative to the usual timber or plastic solution and will accommodate standard loft ladders. The loft hatch comes finished in a polyester powder coated white textured finish which can be overpainted to match the surrounding ceiling if required. The door tray of the hatch is supported along its short length by two removable pivot plates and locked by a concealed key operated budget lock. All of our loft hatches are fitted with a draught seal and insulation in our factory as standard. The loft hatch can also be fitted with our 'invisible keyhole system' which removes the need for unsightly plastic bungs or keyholes which distract the eye and draw attention to the hatch. We also have a long pole key option which allows the invisible keyhole system to be operated from the ground! ‘Classic Brand’ Loft Hatch Specification Manufactured from 1.2 & 0.9mm 'Zintec' coated mild steel Pivot hinged to short side to allow drop down ladder access Finished in textured white polyester powder coat RAL 9010 20% Gloss Budget Lock operated with square drive 'T' key and SLIK System invisible keyhole optional High security lock for communal areas 25mm Picture Frame surround with soft corners Air Sealed and draught stripped to 0.17m2ph Thermal U-Value 0.35W/m3K complying with Building Regulations Can be Fire Rated 60 minutes by Chiltern International Fire as an optional extra